Every roof spray foam removal job we quote includes the survey, the stripping, the clean-up and the completion report. There is no separate charge for waste disposal or for the photographs your lender wants. If scaffolding is needed, it is in the price too. What we cannot know until we are in the loft is whether the timber needs repair, so if we find rot we show you the evidence and quote that separately before touching it.
We get into the loft, measure foam coverage and thickness, identify whether it is open cell or closed cell, and check ventilation and timber condition. You get a written fixed price within 24 hours of the visit, covering everything needed to clear the roof.
Foam is cut back in sections with a spray foam removal saw and oscillating multi-tool, working from the ridge down. Loose material is bagged or vacuumed straight into the extraction unit, so it never spreads through the house while we work.
We seal the loft hatch, run a negative air machine with HEPA filtration, and wear respirators and protective clothing throughout. All foam waste leaves through the loft in sealed bags, and we vacuum the timber and floor before we finish.
Every rafter and batten is checked for rot, damp and insect damage once the foam is off. Minor issues are treated on the spot. If a rafter needs replacing, we show you the photos and quote the repair before we carry it out.
You get a dated report showing the roof structure clear of foam, with photographs of every section. It covers what was found, what was treated and the condition of the timber, and it is the document lenders and surveyors ask for.
All foam, dust and old insulation are removed from site by licensed waste carriers. We take away the bags, sweep the loft, and leave the space clean and ready for whatever insulation you decide to fit next.
Roof spray foam removal is the controlled stripping of cured polyurethane foam from the underside of roof tiles, battens and rafters, followed by cleaning and inspection of the timber. Foam sprayed between rafters in the 1990s and 2000s was often applied too thick, sealing the roof deck so it could not breathe. We cut it back with a spray foam removal saw and oscillating multi-tool, extract the debris with an industrial vacuum, then check every rafter for rot, damp or hidden damage before we sign the job off.
Most Wickford calls come from homeowners who have hit a wall with a mortgage lender, or who have spotted damp patches on loft ceilings after a wet winter. Spray foam in roof rafters traps condensation against the timber, and in older Essex properties with clay tiles and minimal ventilation, that moisture has nowhere to go. If you have been searching for roof spray foam removal near me Wickford and keep finding firms who only quote over the phone, we survey first, then price the work against what is actually up there.
Every job follows the same five steps, whether it is a small loft in Shotgate or a full roof in Rettendon. You get a fixed price after the survey, a start date we keep, and a clean house when we leave.
Schedule
Call or book online — a real human picks up and confirms a 2-hour arrival window.
Diagnose
Licensed tech inspects on-site, then walks you through the cause and your options.
Fix
The job is completed to code and done right the first time — no shortcuts, no surprises.
Guarantee
Every job backed by a written workmanship warranty — and we stand behind it.
Spray foam removal saw
Cuts cured foam away from rafters and battens in controlled sections. It lets us take the bulk off quickly without levering against tiles or tearing into the roof deck.
Oscillating multi-tool
Gets into the corners, rafter ends and eaves where a saw will not reach. We use it to trim foam back flush to the timber so the structure can be inspected properly.
Industrial vacuum
Pulls loose foam, dust and debris straight out of the loft as we cut. Running it alongside the cutting keeps the air clear and stops material spreading into the house.
Negative air machine
Creates a slight pressure drop in the loft so dust and foam particles travel towards the extraction point rather than into your landing or bedrooms. HEPA filtration catches the fine residue.
Dry ice blasting machine
Used as a finishing pass on thin foam residue. Dry ice pellets freeze and lift the last of the material off rafters without abrasive damage to the timber.
Respirators and protective clothing
Cured foam dust and isocyanate residue are not things to breathe in. Every technician works in a fitted respirator, coveralls, gloves and eye protection for the whole job.
Controlled section cutting
We work from the ridge down in manageable sections rather than attacking the whole roof at once. Each section is cut, extracted and inspected before we move on, which keeps the structure stable and stops foam falling into the loft in one uncontrolled mass.
Negative pressure containment
The loft hatch is sealed and a negative air machine runs throughout the job. Air is pulled from the living space into the loft and out through HEPA filtration, so dust and foam particles never travel the other way into your home.
Timber condition assessment
Once the foam is off, every rafter and batten is checked for rot, damp and insect damage. We photograph what we find and treat minor issues on the spot, giving you a dated record of the roof structure's condition.
Dry ice finishing pass
Where foam residue clings to the timber after cutting, dry ice blasting freezes and lifts it without abrasives. It leaves rafters clean enough for inspection and ready for whatever insulation or ventilation work comes next.
01
What we do: We survey within 48 hours, strip the foam, photograph the roof structure and issue a completion report the lender can act on. If the deadline is tight, we bring extra technicians to finish in a single day.
→ The buyer's surveyor signs off the roof, the mortgage offer is reinstated, and the sale completes without further delay.
02
What we do: We identify the foam trapping moisture against the rafters, remove it, clear any saturated insulation and inspect the timber for rot. Any soft sections are treated before we close up.
→ The ceiling dries out, the timber is sound, and the loft is ready for a fresh insulation spec that lets the roof breathe.
03
What we do: We work around the changeover, strip the foam and old mineral wool in one visit, and leave the loft clean and ventilated. Out-of-hours working keeps noise away from neighbouring properties.
→ The property is ready to re-let with a clear roof structure and paperwork on file for future surveys or sales.
04
What we do: We carry out an insulation assessment, confirm the foam type and coverage, and quote for removal. If the foam is thin and sound, we tell you honestly whether removal is needed or whether a repair will do.
→ You negotiate the purchase with a real number in hand, or walk away knowing exactly what the roof needs.
Wickford sits in mid-Essex with a mix of 1930s semis, post-war estates and newer townhouses, and the roof stock reflects that. Older properties often have clay tiles, minimal eaves ventilation and rafters that have already taken on some moisture before foam was ever sprayed. When we carry out roof insulation removal in Wickford Essex, we plan around that: cutting foam back carefully on older timber, checking eaves gaps that may have been sealed over, and allowing extra drying time where the roof void has been closed up for years. The local climate does not help. Wickford gets its share of damp winters and warm, humid summers, and a foam-sealed roof traps that moisture against the timber through both. If you have been searching for spray foam removal from roof rafters Wickford and want a straight answer on cost, we survey first and price against what is actually in your loft, not a phone estimate. Most jobs in the town are completed within one to three days, and we clear the site the same week.
Wickford Town Centre
A high proportion of older terraced and semi-detached homes with clay-tiled roofs and tight loft access. We plan for narrow hatches and use smaller cutting tools where space is limited.
Shotgate
Post-war housing with generous lofts but often minimal eaves ventilation. Foam here tends to have sealed the vents completely, so restoring airflow is part of the job.
Rettendon
Larger detached properties and converted barns with steep roofs and wide rafter spans. Closed cell foam is more common here, and jobs usually take an extra day to strip.
Battlesbridge
A mix of period cottages and newer builds near the river. Damp is a recurring theme, so we pay close attention to timber condition once the foam is off.
Ramsden Bellhouse
Detached homes with complex roof shapes and multiple roof voids. We survey each section separately and quote the full removal as one fixed price.
Damp winters and humid summers across mid-Essex
Foam-sealed roofs trap moisture against timber through both seasons. We allow extra drying and inspection time on older roofs where the void has been closed for years.
Older clay-tiled roofs with minimal ventilation
Tiles and battens are more fragile, so we work from inside the loft wherever possible and avoid levering against the roof covering. Any tiles lifted are matched and refitted the same day.
Tight loft hatches in 1930s properties
Narrow access limits the size of equipment we can bring in. We use smaller cutting tools and bag foam by hand in these lofts, which adds a little time but protects the structure.
Mixed foam types across the same roof
Some installers used open cell in one bay and closed cell in another. We identify each type at survey and price the job against the densest foam present, so there are no surprises mid-job.
Spray foam was sold as a quick fix for cold lofts, and for a while it worked. The trouble shows up years later, when the roof cannot breathe and the timber starts to suffer. These are the problems we are called out to most often around Wickford and mid-Essex.
Problem
Lenders class spray foam as a risk because they cannot inspect the roof structure underneath it. A sale can stall for months, and buyers walk away rather than take the problem on.
Our Fix
We strip the foam, inspect and photograph the full roof structure, and issue a completion report formatted for lenders and valuers. Most stalled sales move again within a few weeks of the report landing.
Problem
Foam sprayed tight against tiles and felt seals the roof deck. Condensation forms on the underside, soaks into rafters, and over several winters the timber softens and starts to rot.
Our Fix
We remove the foam, dry and inspect the timber, and treat or replace any rotten sections. Restoring airflow through the roof void stops the problem returning, and we show you exactly what was found with dated photographs.
Problem
If you are seeing brown stains or mould on the ceiling below the loft, moisture is already sitting against the roof structure. Left alone, it spreads into plasterboard, insulation and electrics.
Our Fix
We trace the source, strip the foam that is trapping the moisture, and clear any wet insulation. Once the roof void can breathe again, the ceiling dries out and can be repaired or redecorated.
Problem
Spray foam in roof rafters often covers the eaves vents and blocks the gap between insulation and felt. Without airflow, every winter brings fresh condensation and the timber never fully dries.
Our Fix
We clear the foam from vents and rafter bays, check the eaves gaps are open, and advise on the right ventilation spec for your roof. That keeps air moving and protects the timber long after we have gone.
Spray foam removal is not a job to rush. Done badly, it cracks tiles, tears felt and leaves foam dust through the whole house. Done properly, it clears the roof structure, restores ventilation and gives you paperwork a lender will accept.
Mortgage-ready paperwork
Lenders often refuse a mortgage when spray foam is present because they cannot inspect the roof structure. We remove the foam, photograph every rafter, and issue a completion report showing the roof deck is clear and sound. That report is what surveyors and valuers ask for, and it is usually enough to get a stalled sale moving again.
No cracked or broken tiles
We work from inside the loft wherever possible, using a spray foam removal saw and oscillating multi-tool to cut foam away from battens without levering against tiles. On the few jobs where tiles must be lifted, we match and refit them the same day. In four years we have not lost a roof to over-enthusiastic removal.
Dust kept out of your home
Foam dust and isocyanate residue are nasty if they spread through a house. We seal the loft hatch, run a negative air machine with HEPA filtration, and wear full respirators and protective clothing. Everything comes out through the loft, bagged and vacuumed, so your landing, bedrooms and kitchen stay clean.
Roof structure checked and treated
Once the foam is gone we inspect every rafter and batten for rot, woodworm and damp. If we find soft timber we treat it or replace the affected section before closing up. You get a roof that is genuinely sound, not just foam-free, and a clear record of what was found and fixed.
Google ★★★★★4.9
Foam in the roof had stalled our sale for months. They surveyed on the Tuesday, stripped it by Thursday, and sent the report the same week. The lender accepted it and we completed. Clean work, no mess in the house, price exactly as quoted.
Google ★★★★★5.0
Two other firms said the tiles would have to come off. These lads cut the closed cell foam out from inside the loft, no broken tiles, no leaks. They found a damp rafter we did not know about and treated it. Honest and tidy.
Checkatrade ★★★★★4.8
Used them on a rental in Rettendon. Worked around the tenants, cleared the foam and old wool in one visit, and left the loft spotless. The insulation assessment afterwards was straight, no pressure to buy anything. Would use again.
Google ★★★★★4.9
Booked after a surveyor flagged spray foam in the rafters. They explained exactly what they would do, sealed the loft so dust stayed out, and finished in two days. The photo report was thorough and our buyer's lender was happy with it.
Real answers to the questions we hear most often from local homeowners and property managers.
If you are searching for spray foam removal near me in Wickford, we cover the town and surrounding villages with the same crew and the same fixed-price approach. Most local jobs are surveyed within 48 hours of your call.
View Spray Foam Removal near meWhen a lender or buyer needs foam gone quickly, we can sometimes mobilise a same day spray foam removal crew for smaller lofts in Wickford. Call before midday and we will tell you honestly whether we can get to you that day.
View same day Spray Foam RemovalOur 24/7 spray foam removal line is there for urgent situations, like a leak appearing after foam removal elsewhere or a sudden survey deadline. Call any time and we will arrange the earliest possible visit across Wickford and Essex.
View 24/7 Spray Foam RemovalMost of our work is residential spray foam removal on occupied homes in Wickford, from 1930s semis to modern townhouses. We seal the loft, protect your floors and furniture, and keep dust out of every room while we strip the foam.
View Residential Spray Foam RemovalWe also handle commercial spray foam removal for landlords, small warehouses and business premises around Wickford. Out-of-hours working is available so your operation keeps running while we clear foam from roof voids and rafters.
View Commercial Spray Foam RemovalLoft spray foam removal is the most common job we do in Wickford. Foam sprayed across loft ceilings and rafters traps moisture and blocks ventilation, and we strip it back, clean the timber and leave the loft ready for a proper insulation spec.
View loft spray foam removalCall us on 03335672543 or email [email protected] and we will get back to you the same working day. We cover Wickford and the surrounding Essex villages, and our phone line is open 24/7 for urgent jobs. Free assessments are usually booked within 48 hours.
Phone
03335672543Address
6 Station Approach, Wickford SS11 7AT, United Kingdom, Wickford, Essex
Hours
Mon–Fri: 7AM – 7PM
Sat: 8AM – 4PM
Sun: Emergency Only
24/7 Emergency Available
